Boost Your Preparation with PrepAwayExam Juniper JN0-637 Online Practice Test Software

Blog Article

Tags: JN0-637 Answers Free, Reliable JN0-637 Practice Materials, JN0-637 Valid Exam Sample, New JN0-637 Test Syllabus, Valid Exam JN0-637 Book

P.S. Free & New JN0-637 dumps are available on Google Drive shared by PrepAwayExam: https://drive.google.com/open?id=1FHLyXMyam0ZUr7l7YzKYMRumOWXr2hoN

Our Security, Professional (JNCIP-SEC) test torrent has been well received and have reached 99% pass rate with all our dedication. As a powerful tool for a lot of workers to walk forward a higher self-improvement, our JN0-637 certification training continued to pursue our passion for advanced performance and human-centric technology. Only 20-30 hours are needed for you to learn and prepare our JN0-637 test questions for the exam and you will save your time and energy. No matter you are the students or the in-service staff you are busy in your school learning, your jobs or other important things and can’t spare much time to learn. But you buy our JN0-637 Exam Materials you will save your time and energy and focus your attention mainly on your most important thing. You only need several hours to learn and prepare for the exam every day.

Juniper JN0-637 Exam Syllabus Topics:

Topic	Details
Topic 1	Troubleshooting Security Policies and Security Zones: This topic assesses the skills of networking professionals in troubleshooting and monitoring security policies and zones using tools like logging and tracing.
Topic 2	Advanced IPsec VPNs: Focusing on networking professionals, this part covers advanced IPsec VPN concepts and requires candidates to demonstrate their skills in real-world applications.
Topic 3	Automated Threat Mitigation: This topic covers Automated Threat Mitigation concepts and emphasizes implementing and managing threat mitigation strategies.
Topic 4	Layer 2 Security: It covers Layer 2 Security concepts and requires candidates to configure or monitor related scenarios.
Topic 5	Advanced Policy-Based Routing (APBR): This topic emphasizes on advanced policy-based routing concepts and practical configuration or monitoring tasks.
Topic 6	Advanced Network Address Translation (NAT): This section evaluates networking professionals' expertise in advanced NAT functionalities and their ability to manage complex NAT scenarios.

>> JN0-637 Answers Free <<

Valid JN0-637 Exam Dumps Materials - JN0-637 Quiz Cram - PrepAwayExam

If you are quite anxious about the exam due to you don’t know the real environment, then you need to try our JN0-637 study material. JN0-637 soft test engine stimulates the real environment of the exam, it will help you know the general process of the exam and will strengthen your confidence. Furthermore, we have a team with the most outstanding experts to revise the JN0-637 Study Materials, therefore you can use the material with ease.

Juniper Security, Professional (JNCIP-SEC) Sample Questions (Q23-Q28):

NEW QUESTION # 23
Exhibit

You configure Source NAT using a pool of addresses that are in the same subnet range as the external ge-0/0/0 interface on your vSRX device. Traffic that is exiting the internal network can reach external destinations, but the return traffic is being dropped by the service provider router.
Referring to the exhibit, what must be enabled on the vSRX device to solve this problem?

A. Persistent NAT
B. Proxy ARP
C. DNS Doctoring
D. STUN

Answer: C

NEW QUESTION # 24
You are deploying IPsec VPNs to securely connect several enterprise sites with ospf for dynamic routing. Some of these sites are secured by third-party devices not running Junos.
Which two statements are true for this deployment? (Choose two.)

A. Sites with overlapping address spaces can be supported.
B. Sites with overlapping address spaces cannot be supported.
C. OSPF over IPsec can be used for intersite dynamic routing.
D. OSPF over GRE over IPsec is required to enable intersite dynamic routing

Answer: A,D

Explanation:
Understanding the Scenario:
* Objective: Deploy IPsec VPNs connecting multiple enterprise sites using OSPF for dynamic routing.
* Challenge: Some sites use third-party devices not running Junos OS.
* Considerations:
* Compatibility between Juniper and third-party devices.
* Support for dynamic routing protocols (OSPF) over IPsec VPNs.
* Handling overlapping IP address spaces.
Option Analysis:
Option A: OSPF over IPsec can be used for intersite dynamic routing.
* Explanation:
* OSPF Characteristics:
* OSPF uses multicast addresses (224.0.0.5 and 224.0.0.6) for neighbor discovery and routing updates.
* IPsec Limitations:
* Standard IPsec tunnel mode does not support multicast traffic natively.
* Multicast traffic cannot traverse IPsec tunnels unless encapsulated.
* Juniper Solution:
* Juniper devices can use routed VPNs (route-based VPNs) with st0 interfaces, allowing OSPF over IPsec.
* However, this requires support from both ends of the VPN tunnel.
* Third-Party Devices:
* May not support OSPF over IPsec without additional configurations.
* Conclusion:
* Option A is not universally true in this scenario due to third-party device limitations.

NEW QUESTION # 25
You are asked to establish a hub-and-spoke IPsec VPN using an SRX Series device as the hub. All of the spoke devices are third-party devices.
Which statement is correct in this scenario?

A. You must always peer using loopback addresses when using non-Junos devices as your spokes.
B. You must statically configure the next-hop tunnel binding table entries for each of the third-party spoke devices.
C. You must create a policy-based VPN on the hub device when peering with third-party devices.
D. You must ensure that you are using aggressive mode when incorporating third-party devices as your spokes.

Answer: B

Explanation:
Explanation:

NEW QUESTION # 26
Regarding IPsec CoS-based VPNs, what is the number of IPsec SAs associated with a peer based upon?

A. The number of forwarding classes configured for the VPN.
B. The number of classifiers configured for the VPN.
C. The number of CoS queues configured for the VPN.
D. The number of traffic selectors configured for the VPN.

Answer: D

NEW QUESTION # 27
Click the Exhibit button.

Referring to the exhibit, which three actions do you need to take to isolate the hosts at the switch port level if they become infected with malware? (Choose three.)

A. Deploy Juniper Secure Analytics.
B. Deploy Security Director with Policy Enforcer.
C. Enroll the SRX Series device with Juniper ATP Cloud.
D. Configure AppTrack on the SRX Series device.
E. Use a third-party connector.

Answer: B,C,E

Explanation:
A: Enroll the SRX Series device with Juniper ATP Cloud. This is essential for the SRX to receive threat intelligence from ATP Cloud, enabling it to identify infected hosts and take action.
B: Use a third-party connector. In this specific scenario, a third-party connector is required to integrate the SRX with the third-party switch. While Juniper has native integration for its EX switches, a connector is necessary to communicate with and manage the third-party switch.
C: Deploy Security Director with Policy Enforcer. Security Director orchestrates the automated response, and Policy Enforcer translates the policies into device-specific commands for the SRX and the third-party switch (via the connector).

NEW QUESTION # 28
......

The PrepAwayExam is a leading platform that is committed to making the JN0-637 exam dumps preparation simple, quick, and successful. To achieve this objective PrepAwayExam is offering real, valid, and updated Juniper JN0-637 practice questions in three different formats. These formats are PrepAwayExam Juniper JN0-637 PDF Dumps Files, desktop practice test software, and web-based practice test software. All these PrepAwayExam Security, Professional (JNCIP-SEC) exam questions formats are easy to use and compatible with all web browsers, operating systems, and devices.

Reliable JN0-637 Practice Materials: https://www.prepawayexam.com/Juniper/braindumps.JN0-637.ete.file.html

DOWNLOAD the newest PrepAwayExam JN0-637 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1FHLyXMyam0ZUr7l7YzKYMRumOWXr2hoN

Report this page

BOOST YOUR PREPARATION WITH PREPAWAYEXAM JUNIPER JN0-637 ONLINE PRACTICE TEST SOFTWARE

Boost Your Preparation with PrepAwayExam Juniper JN0-637 Online Practice Test Software